Enkei 3/4" Super Short Metal Valve Stems for your Motorcycle (and Car) - Package of 2

When space is tight and you need the shortest all metal valve stem, this is your pick.  All metal construction with double seal for the best sealing.

Features:	Super Short 3/4" Valve Stem, for lighter weight for racing applications. 2 Valves per package Valve weight: 22g Size: 11.3mm (0.453") Rim Hole Opening. Easier access to valve stem. Ultra Low profile design. All metal construction. Double air seal for the best sealing possible. Double internal locking nuts keeps everything together. Metal Valve Cap included. Rated to 200psi
Fitting:	These valve stems fit most Japanese and American Motorcycles with a standard 11.3mm (0.453") rim hole opening. Some Italian and some older European motorcycles use a 8.3mm (0.327") rim hole.  These parts will not work for these applications. Please check before ordering.
Assembly Instructions:	Remove both locking nuts, one washer and lower seal from valve stem (See picture below) Clean both valve housing and inside and outside of valve stem hole on rim. Insert valve onto rim, taking care not to damage the gasket at the base of the valve stem. Re-Attach lower seal, washer and one locking nut. Tighten first locking nut to 7Nm to 10Nm, then attach second nut to double lock valve stem on motorcycle. Note:  Excessive torque may deform and/or damage the rubber seal gasket.
Special Note:  $1 of purchase will go to the Road Racing World Action Fund.