Complete 4pcs Kit for attaching OEM motorcycle bodywork together.  14mm Dzus® bolts are longer to fit plastic bodywork, or 3 panels of fiberglass bodywork together.  Rivet Plates work in areas where a clip plate does do not fit.  Rivet plates are wider than clip plates for mounting on tabs and/or bodywork

Special Note:  $1 of every set will go to the Road Racing World Action Fund.

Kit Includes:
4 - 6mm D-Ring Panex D8 Fasteners	Length: 14mm Coating: Zinc Plate with BLACK Chromate
4 - 6mm Clip on Panex D8 Retainers	Coating: Zinc Plate with Chromate
10 - Pop Rivets	For attaching Rivet on Retainers 2 extra pop rivets just in case
10 - Retaining Washers.	Material: High density polyethylene 2 extra washers for your tool box
Note: Street bikes OEM bodywork mounting tabs most likely will require some modification for most motorcycles.  This is a "Do It Yourself" KIT and removal of OEM wellnuts and Spring nuts will be required.  OEM Bodywork mounting tabs may require some trimming to mount Dzus® rivet plate to same location as the OEM Wellnuts and Spring Nuts.  The use of a razor blade, rotary trim tool and drill bit will help remove plastic ribs for space around clip and enlarge the mounting hole to fit the 6mm Dzus®  bolt.
NEW D8 Style Dzus® Panex Bolts: New Generation Dzus®  Panex Bolt that is lighter than original D3 Style Dzus® Panex Bolt 100% Compatible with old D3 Mounting Hardware. Thinner main bolt shaft with 6mm Engagement head. New smaller Black retaining washers.

 

Combine 4pcs and 6pcs kits to create custom kit sizes...
4pcs kits	6pcs kits	Total Number of Dzus®
1 - 4 pcs kit	1 - 6 pcs kit	10 Dzus® Pcs
2 - 4 pcs kit	1 - 6 pcs kit	14 Dzus®  Pcs
1 - 4 pcs kit	2 - 6 pcs kit	16 Dzus®  Pcs

Dzus®  Bolts Specs & Drawing
	Additional Dzus®  Bolt Specs / Info (L) Working Length: 14mm Shaft Length : 17mm Grip Range: 5.5mm to 7.4mm Maximum Grip with out washers Minimum Grip using 2 washers Minimum bodywork Hole size: 6.2mm English: 1/4 Inch

Dzus® Clip Specs & Drawing
	Dzus® Rivet Plate Specs / Info Minimum flat space for rivet plate mounting: 33mm Minimum clearance behind bodywork: 9mm Grip Range: 5.5mm to 7.4mm Maximum Grip with out washers Minimum Grip using 2 washers

Dzus® is a Registered Trademark of Southco Inc.